bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Forest River Georgetown Motorhome


  • Correct Replacement Control Module for Lippert Coach Step 164194
  • I reached out to the manufacturer, Lippert, about the problems you were having and they told me the issue is your control module on the Kwikee 25 Series # LC3658373 being the wrong one. They said (rather bluntly): "You cannot use a Kwikee controller on a Coach step. The correct part number is 301702." So to remedy this issue what you need is the Replacement Control Module for Lippert Electric Coach Step # LC301702. I have added a link to a video review of this part for you to check...
    view full answer...

  • Replacement Locknuts For The Roadmaster Anti-Sway Bars On A 2011 Forest River Georgetown MH
  • I was able to track down some possible solutions for you! I went ahead and checked out the Roadmaster Rear Anti-Sway Bar # RM-1139-149 system, for your 2011 Forest River Georgetown Motorhome, and discovered that this system use both a 5/8" locknut # 6-38, and a 1/2"-13 locknut # 12ZLN. If you have just the Roadmaster Front Anti-Sway Bar # RM-1139-148, then you'll just need the 1/2"-1 locknut # 12ZLN.
    view full answer...

  • Replacement Gear and Parts for Original Lippert 3 Step on 2008 Forest River Georgetown 373
  • For the replacement gear you will use the Replacement Entry Step Gear for Lippert Kwikee 25 and 26 Series Triple Steps # LC369354. I believe the shear pin you are referring to is a part of the gear itself. The motor is # LC369506 which comes with the smaller gear. If you want to replace the entire assembly you can use the Lippert Components Kwikee Step Replacement Kit # LC379804.
    view full answer...

  • Replacement Parts for RV Slide Topper With Broken Torsion Bar
  • The Replacement Drive Head and Roll Tube for Solera RV Slide-Out Awning - Black # LC34FR is one of two parts that help retract your awning. The other part is the Replacement Idler Head and Roll Tube for Solera RV Slide-Out Awning - Black # LC87FR. This is the part that has the spring wrapped around it and sounds like what you are describing. The Spring and Rod are not available independently.
    view full answer...

  • Replacement Parts for Lippert Coach Step on Class A Motorhome
  • The Replacement Control Module for Lippert Electric Coach Step # LC301702 is the brain for your coach step with serial number 06190. We also have the following parts for your coach step: Replacement Motor for Lippert Electric Coach Step # LC301695 Replacement Spacer for Lippert Electric Coach Step # LC128958 Replacement Door Switch for Lippert Electric Coach Step # LC301694 Replacement Gear for Lippert Single and Double Electric Coach Step # LC301696 Replacement Double Ball Joint for...
    view full answer...

  • Needing Replacement Door Latch For Forest River Georgetown Motorhome
  • The Global Link # 295-000015 latch is meant for a baggage door latch. It will replace a baggage door latch from Global Link, Fastec (FIC), Bauer, or Lippert Components that measures 4-1/2 x 5. Unfortunately, there isn't an existing database to tell us specifically what latch your Motorhome uses. If you're looking for an entry door latch, you'll need to contact Forest River for that, as all the entry door latches we offer are meant for towed RVs which aren't meant to be occupied while...
    view full answer...

  • Replacement Steps for Lippert 216945 Steps
  • I spoke with my contact at Lippert who informed me that the 216945 that you referenced is no longer sold but there are replacement steps for you. The Kwikee 25 Series Steps # LC3658373 will replace your steps directly. They have a rise of 8" and a run of 9" with a weight capacity of 300 lbs. My contact at Lippert confirmed this is the replacement that you need.
    view full answer...

  • Holding Tank Fitting 3 Hub Fitting
  • The closest match that we have is the Valterra # T1035-2 RV Sewer Elbow. The internal measurement on the spigot end is 3" and is meant for a glued connection rather than a push together connection with an o-ring.
    view full answer...